logo
banner banner
Blog Details
Created with Pixso. Home Created with Pixso. Blog Created with Pixso.

What are the differences between bipolar and unipolar stepper motors?

What are the differences between bipolar and unipolar stepper motors?

2026-11-17

Stepper motors are widely used in industrial automation, CNC machines, 3D printers, medical equipment, and precision positioning systems. They convert electrical pulse signals into precise mechanical movements, allowing accurate control of position and speed.

Based on their winding configurations and driving methods, stepper motors can be operated in two main ways: bipolar and unipolar.

Although both methods achieve precise motion control, they differ significantly in winding design, current flow, driver circuit requirements, winding utilization, and torque performance.

Understanding these differences helps engineers select the right stepper motor and compatible driver for their applications.

1. What Is a Unipolar Stepper Motor?

A unipolar stepper motor typically uses center-tapped windings. Each phase consists of two half-windings, and the motor changes its magnetic field by switching the current between these half-windings.

1. Unipolar vs bipolar stepper motors - Tech Explorations

In a unipolar configuration, current generally flows in only one direction through each half-winding. Therefore, the driver does not need to reverse the current direction within the same winding.

Main structural characteristics:
  • Center-tapped windings: Each phase has a center tap that divides the winding into two half-windings.

  • Wiring configuration: Common two-phase unipolar motors have 5 or 6 wires.

  • Current control: Magnetic polarity changes by switching between different half-windings.

  • Driver design: The driving circuit is generally simpler than that required for bipolar operation.

Working Principle

For a two-phase unipolar stepper motor, each phase contains two half-windings. When the driver energizes different half-windings in sequence, the stator magnetic field changes direction.

The rotor follows these magnetic field changes and rotates step by step.

Since only one half of each phase winding is normally energized at a time, the entire winding is not fully utilized in the same way as in bipolar operation.

Unipolar stepper motors have traditionally been used in printers, scanners, office equipment, and other low-power positioning systems.

2. What Is a Bipolar Stepper Motor?

A bipolar stepper motor typically has one complete winding per phase without a center tap. Instead of switching between two half-windings, the driver reverses the current direction through the same winding to change the magnetic field polarity.

10. Output devices - Naoki Hayashi - Fab Academy 2025

This current reversal is usually achieved through an H-bridge circuit.

Main structural characteristics:
  • Winding configuration: Each phase typically has one complete winding without a center tap.

  • Wiring configuration: Common two-phase bipolar motors use 4 wires.

  • Current control: The driver reverses the current direction to change magnetic polarity.

  • Driver design: An H-bridge circuit is generally required.

  • Winding utilization: The complete phase winding can be utilized, providing greater winding utilization.

Working Principle

When the driver supplies current in one direction, the winding generates a magnetic field with a specific polarity. When the current direction is reversed, the magnetic field polarity also changes.

By controlling the current direction and energizing sequence of the two phases, the motor rotates according to the programmed stepping sequence.

Modern bipolar stepper motors are commonly paired with constant-current chopper drivers. These drivers regulate phase current and support microstepping, helping improve motion smoothness and dynamic performance.

3. Key Differences Between Bipolar and Unipolar Stepper Motors

The most fundamental difference lies in the winding configuration and how the driver controls current direction.

Comparison

Unipolar

Bipolar

Winding structure

Center-tapped

Usually no center tap

Winding configuration

Two half-windings per phase

One complete winding per phase

Common wire count

5 or 6

4

Current direction

Usually unidirectional in each half-winding

Reversible

Driver circuit

Relatively simple

Usually requires an H-bridge

Winding utilization

Generally lower

Generally higher

Driver complexity

Lower

Higher

Torque potential

Relatively limited

Generally higher

Typical applications

Traditional office equipment and simple positioning systems

CNC machines, 3D printers, and industrial automation

It is important to note that actual motor performance also depends on winding parameters, rated current, magnetic circuit design, cooling conditions, and driver settings. Bipolar operation does not automatically guarantee higher torque in every situation.

4. Why Can Bipolar Stepper Motors Typically Deliver Higher Torque?

One of the most important advantages of bipolar operation is its ability to utilize the complete phase winding.

Under comparable motor size, copper usage, and thermal conditions, bipolar operation generally offers better winding utilization and greater torque potential.

There are three main reasons.

Better Utilization of Winding Copper

In a typical unipolar configuration, only one half of the phase winding is energized at a time.

In bipolar operation, current flows through the complete phase winding. This allows the motor to make more effective use of the winding copper.

Improved Winding Utilization

The winding design directly affects resistance, inductance, and current-carrying capacity.

Bipolar configurations allow the complete winding to be optimized for the intended operating conditions, helping improve electromagnetic performance within a limited motor space.

Better Potential for Low-Speed Torque

Stepper motor torque is influenced by phase current, magnetic circuit design, supply voltage, and operating frequency.

A properly designed bipolar motor can provide good holding torque and dynamic torque at low speeds, making it suitable for applications that require stable positioning and reliable load handling.

However, the actual torque advantage depends on the winding design and operating conditions. A direct comparison must consider rated current, winding resistance, inductance, and temperature rise.

5. Why Do Bipolar Stepper Motors Require an H-Bridge Driver?

An H-bridge is an essential circuit structure commonly used to drive bipolar stepper motors. Its main function is to reverse the direction of current flowing through a winding.

Introduction to bipolar stepper motor and its structure and control mode-EEWORLD

Taking one phase winding as an example:

  • When one pair of diagonal switches is activated, current flows through the winding in one direction.

  • When the opposite pair of diagonal switches is activated, the current direction is reversed.

  • By switching between these states, the driver changes the magnetic polarity of the winding.

For a two-phase bipolar stepper motor, two H-bridge circuits are generally required to control the A-phase and B-phase windings independently.

Modern stepper motor drivers also use constant-current chopper technology. By monitoring and regulating winding current, they maintain the current within a preset range.

This approach improves current control accuracy and helps maintain motor performance across different operating speeds.

6. How Do Bipolar and Unipolar Motors Differ in Wiring?

Wiring configuration is another important factor engineers need to consider when selecting a stepper motor.

The common wiring configurations of two-phase stepper motors include:

4-Wire Stepper Motor
  • A+ and A-: Two terminals of the A-phase winding.

  • B+ and B-: Two terminals of the B-phase winding.

A 4-wire motor is typically designed for bipolar operation.

5-Wire Stepper Motor
  • Each phase has a center-tapped winding.

  • The two center taps are usually connected internally.

  • This configuration is generally designed for unipolar operation.

6-Wire Stepper Motor
  • Each phase has an independent center tap.

  • It can be used in a unipolar configuration.

  • Depending on the winding design, it can also be connected to a suitable bipolar driver by using the two outer terminals of each phase winding.

When connecting a 6-wire motor to a bipolar driver, the correct winding terminals must be identified. The center taps should not be connected arbitrarily.

Incorrect wiring may prevent the motor from operating properly and could potentially damage the driver.

7. How to Choose Between Bipolar and Unipolar Stepper Motors?

The right choice depends on the actual requirements of the equipment rather than simply comparing wire counts or driver costs.

Application Requirements

Recommended Consideration

Higher torque output

Bipolar

Precision positioning

Bipolar

Modern constant-current microstepping

Bipolar

Simpler driver circuitry

Unipolar

Traditional low-power positioning systems

Unipolar

CNC machines and industrial automation

Bipolar is more common

3D printing equipment

Bipolar is more common

Conclusion

The main difference between bipolar and unipolar stepper motors lies in their winding configurations and current control methods.

Unipolar stepper motors use center-tapped windings and switch between different half-windings to change the magnetic field direction. Their driving circuits are relatively simple.

Bipolar stepper motors reverse the current direction through complete phase windings using H-bridge circuits. This allows better winding utilization and generally provides greater torque potential under comparable design conditions.

With the development of industrial automation and precision motion control, bipolar driving has become a widely used solution for modern two-phase hybrid stepper motors.

For equipment manufacturers, selecting the right stepper motor requires more than just choosing a driving method. Winding design, electrical parameters, torque-speed characteristics, and actual application requirements must all be considered.